Quarter Inch (1/4") Foot, LITTLE FOOT Attachment - LOW SHANK spring press in the dial and

press in the dial and reset the pin in one of the holes to the right of the previous setting

then stop and make slight adjustments to the fabric so that the piercer can get back on track

Place the two tension discs (L

marked off into 1/8" lines and numbered

Quarter Inch (1/4") Foot, LITTLE FOOT Attachment - LOW SHANK spring press in the dial andFits the Featherweight! The Original Little Foot Quarter Inch Presser Foot by Lynn Graves. Produced in clear lexan for greater visibility for all your machine piecing. The right edge is 1 4" from the center needle position which gives you a scant 1 4" seam allowance. The left edge is a scant 3 8" from the center needle position. This gives a better tension control, as it will cover more feed dogs on most machines. In the photos above you will be able