7/16" UNC HSS Die Nut Brand_Tradequip 0mm x 25mm Centre Height

0mm x 25mm Centre Height Parting Blade

Cutting diameter 6mm

the High Feed cutters are superior when machining in deep pockets with long overhang and/or machining under unstable conditions depending on either the machined component or the long overhang of the machine

Design 2 on image

7/16" UNC HSS Die Nut Brand_Tradequip 0mm x 25mm Centre HeightDie nuts are suitable for repairing damaged or crossed threads or clearing swarf from threads. When using a die nut it is not necessary to apply the same level of precise initial alignment required to form a new thread (i. e. with a die) as the nut will follow the existing threads. They are supplied as hexagon allowing them to be turned by a standard spanner or adjustable wrench without the need for a die stock.