TNMG160408-MF2 TP3500 Insert 15A0925-MITSUBA Rubber Sleeve Tool Adapter reduces

Rubber Sleeve Tool Adapter reduces 65mm Power Tool port to 32mm Extractor Hose

4mm Reduced length 2mm Overall length 50mm E5820051

Air consumption @ recommended pressure2

72 tooth fine ratcheting mechanism has a 5° swing arc decreases hand-over-hand turning

TNMG160408-MF2 TP3500 Insert 15A0925-MITSUBA Rubber Sleeve Tool Adapter reducesTP3500 is Intended for rough or intermittent turning in steels and stainless steels as well as general turning of stainless steels. Ti(C,N) + Al2O3 DURATOMIC MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm rev. Good capacity for medium rough machining. Indicative machining range: f = 0,100,40 mm rev, ap = 0,23,0 mm.