Howe Easy Adjuster Weld-On Sway Bar Adjuster - 7/8-9 in Thread - Up to 1-1/2 in Sway Bar R040003M 3/4 in 36 Spline to

3/4 in 36 Spline to 3/4 in DD

the chute launcher was over 8 years in development

Oldsmobile Custom Cruiser 1977-1975

but it is recommended that they are replaced as part of your vehicle's maintenance program

Howe Easy Adjuster Weld-On Sway Bar Adjuster - 7/8-9 in Thread - Up to 1-1/2 in Sway Bar R040003M 3/4 in 36 Spline toAdjusting the sway bar pre load has always seemed to be a bigger job than it should be. You have to jack up the car, turn the wheel, loosen one jam nut and tighten the other. Now there is a better way. This adjuster is simple to install and use. One will fit easily on any chassis. No need to jack up the car. To adjust, use a 3 8" drive wrench on the top and simply turn in or out to pre load. a thread drag adjuster prevents it from moving on its own.