WNMG060404-MF2 TP3501 Trigon Turning Insert Double Sided FLO-71229 Non Compatible models Fully compatible

Non Compatible models Fully compatible with all HiKOKI 36V Multi Volt tools

CABLE JACKET FINISH Natural

MAN 339 Type D

Visus 3/4" T/S Chucking Reamer Morse Taper #2

WNMG060404-MF2 TP3501 Trigon Turning Insert Double Sided FLO-71229 Non Compatible models Fully compatibleTP3501 is Intended for rough or intermittent turning in steels and stainless steels as well as general turning of stainless steels. Ti(C,N) + Al2O3 DURATOMIC MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm rev. Good capacity for medium rough machining. Indicative machining range: f = 0,100,40 mm rev, ap = 0,23,0 mm.