Intermatic - FF15MH - Spring Wound Countdown Timer, Commercial, Silver 6" SS Pop Up 20 5004PC20 Rotors with Pre

20 5004PC20 Rotors with Pre Installed 2

LED Sensor Switch Type Occupancy Sensor Technology PIR (Passive Infrared) Adjustable Light Level Max Daylight Adjustable Light Level Min 30 lux Adjustable Time Delay Max 30 min Adjustable Time Delay Min 15 sec Ballast Fluorescent 500 VA Ballast Fluorescent Ranges 500 VA Category Occupancy/Vacancy Sensors Web Electronic Ballast LED 500 VA Includes Wall Plate Yes Inductive 500 VA Inductive Load Ratings Ranges 500 VA Maximum Mounting Height (ft) 4 ft Motor (Three-Phase) 1/8 HP Motor Three Phase Ranges 1/8 HP PIR Coverage Area (sq ft) 980 PIR Lens 2 Coverage Pattern (degrees) 150 Rating General Purpose Tungsten (Incandescent) Range(s) 500 W Tungsten Incandescent 500 W Operating Temperature Max (°C) 55 Operating Temperature Max (°F) 131 Operating Temperature Min (°C) 0 Operating Temperature Min (°F) 32 Product Depth (in) 1

Fits 3/4" and 1/2" fittings

their smaller design does not limit but maximizes cutting power when making cuts up to 18mm / 0

Intermatic - FF15MH - Spring Wound Countdown Timer, Commercial, Silver 6" SS Pop Up 20 5004PC20 Rotors with PreSpec Sheet Install Manual Intermatic FF15MH Spring Wound Countdown Timer, Commercial, 125 277 VAC, 50 60 Hz, SPST, 15 Minute Max, With Hold, Silver The FF Series Commercial Countdown Timers are designed to replace any standard wall switch and do not require electricity to operate. These energy efficient switches automatically limit the ON times for fans, lighting, motors, heaters, and other energy consuming loads. A commercial "brushed metal" look