12 Volt Pump Slotted Filter Suction Hose Assembly Crimped PVC 1/2” MPT POLY / PVC invented the design of our

invented the design of our PVC slotted chemical tank filter

Don't forget to purchase a street 45- high pressure steel (3361) or a street 45 brass low pressure (2354) or Softwash use to install where the hose connects to the reel to allow the hose to lay flat against the reel

Draw rate 0 to 20%

Red spring

12 Volt Pump Slotted Filter Suction Hose Assembly Crimped PVC 1/2” MPT POLY / PVC invented the design of ourThis is a non collapsible suction hose for use with a 12 volt pump, 1 2 air diaphragm pump or any pump in these related industries. The inlet of the pump must be 1 2" FPT. 12' long x 1 2" MPT crimped on a 1" inner diameter clear ag hose w slotted PVC filter. Installed with an elbow for top draw from tank and to allow user to fit the slotted filter end into the bung opening of a 55 gallon drum. You must fabricate and provide the PVC sleeve to slip over