SMC CRA1 Series Rotary Actuator Rack and Pinion Type, CDRA1BY50-90Z Stroke_20^350mm When two or more deep

When two or more deep groove ball bearings are used in combination and mounted adjacent to each other a duplex set (D2) should be used

Specification item model symbol Specification information With auto switch D With auto switch Mounting support type B Basic type tube inner diameter 10 tube inner diameter 10mm cylinder stroke 50 dual stroke mark - No dual stroke mark cylinder stroke 2 - Cylinder stroke 2 None Cylinder additional symbol - rubber cushion Port location on head cover - 90° about axis rocking support bracket - no metal fittings rod end bracket - no metal fittings auto switch - Without auto switch Auto switch additional symbol - 2 with or without Auto switch mounting type B band attached Custom made specifications - standard

410YLW Zenex™ Thermoplastic Safety Padlock features a 1-1/2in (38mm) wide plastic yellow body and a 1-1/2in (38mm) tall

Description Include Weight (G) 200-7469 GA-015A 1/4" Hex Shank Bit

SMC CRA1 Series Rotary Actuator Rack and Pinion Type, CDRA1BY50-90Z Stroke_20^350mm When two or more deepOVERVIEW The CRA1 rack & pinion rotary actuator offers very high torque to size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9. 65" X 4. 41". Single shaft end or double shaft end models are available. Can be mounted on 2 sides of a small auto switch ( D M9?? span> type ) Can be mounted from the front of the auto