Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" they are sanded smooth and

they are sanded smooth and then oiled for protection

This all-aluminum Tri-Pod attaches directly to the end of the Safety Vacuum Nozzle in either 4” or 6” sizes

- 5" Diameter

Once you get to the correct level to enter the pipe just lift the rope and the bridge slowly becomes horizontal so you can lift it and slide it into place in the line

Pull Out And Turning Handle for Sectional Steel Rods Size:5/16" they are sanded smooth andThis tool you can use to push, pull or turn the rods. You can slide this tool right over the rod and it will slip over the coupling to allow you to push or pull the sectional rods. Insert the pin through the center hole of the coupling and you can turn the rods too. This is done with hand rodding. Pick for either your 5 16 or 3 8 rods. Made of steel and zinc plated.