Oregon 73RD084G RipCut Saw Chain, 3/8" Pitch, .058" Gauge, 84 Drive Links Bar Mount_T041 pass it on the exit

pass it on the exit guide and pull on it when the time comes

very lightweight - Triple-locking gate means three steps are required to open the gate

Use only on the following harvester models: Timberjack 762C (with retrofit kit) and Waratah HTH 260

Oregon replacement bearing for the Oregon 24549A chain spinner

Oregon 73RD084G RipCut Saw Chain, 3/8" Pitch, .058" Gauge, 84 Drive Links Bar Mount_T041 pass it on the exitSpecially made for ripping making cuts parallel to the wood grain. 73RD has a special ripping application grind for making dimensional boards and planks from larger timbers. For use on chain type sawmills. Not recommended for hand held use. Any saw mill worker will tell you that ripping chain is different from all other saw chains. You need a special kind of chain for ripping cuts, the kind that transforms raw timber into the boards and planks used in