Hoppe Multipoint 1.38" Backset Manual Gear with Tongue Bottom Extension Mul-t-lock Switch Lock All magnets in the series

All magnets in the series feature die-cast housings and are available in aluminum and dark bronze finishes

Standard Mortise Door Prep ANSI A115

Snap-in and removal of thumbturn knob for temporary use of locks at construction site

Simplify Key Control: Assign employees a single key that gives them access to all the locks they need to open

Hoppe Multipoint 1.38" Backset Manual Gear with Tongue Bottom Extension Mul-t-lock Switch Lock All magnets in the seriesManual Tongue Hoppe Gear Hoppe 16mm Manual 35 92 Gear with Tongue, 1" Deadbolt & 36" Handle Height Faceplate: 5 8 inch (15. 875mm) Backset: 1 3 8 inch (35mm) Deadbolt Throw: 1 inch (25. 4mm) Handle Height: 36. 00 inch (914mm) Maximum Cutoff 1. 18 inches. 29. 65 Tongue Position from center of handle To Change Handling Reversing Latch: Latch handing may be changed by pulling spring latch out and turned in the opposite direction and released. May need to