CMT 192.506.11 - 1/2" X 1-1/2" SOLID CARBIDE SPIRAL ROUTER BIT (DOWNCUT) cordless nailer (The GL622IR is used for

(The GL622IR is used for horizontal alignment only)

the CHANNELLOCK® 360 Welder's Plier offers XLT™ cutting technology which positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs

maneuverability and minimal user fatigue and ideal for overhead and extended use applications

It includes a GDX18V-1600 Freak Bit/Socket Impact Driver that has a two-in-one chuck that offers a 1/4 In

CMT 192.506.11 - 1/2" X 1-1/2" SOLID CARBIDE SPIRAL ROUTER BIT (DOWNCUT) cordless nailer (The GL622IR is used forThe new CMT solid carbide spiral flush trim bit is manufactured with a special supermicrograin formulation that has increased hardness with a higher transverse rupture point. Combined with the low helix cutting angle, this bit with double bearing allow the cabinet maker to sheer wood and wood products cleanly, providing more efficient chip ejection than standard flush trim bits. In production settings these new bits will run cooler and the edges will