1 in x 20 ft Guardian Hose Non-Heated for All Melter PTFE Core - Built in Swivels and Removable Cover Crack Wand Handle 5" square 7 Gauge Standard

5" square 7 Gauge Standard Steel Base PlateSteel 1-5/8" Round Galvanized Post 72" x 7"Polyethylene Bollard with 3M Reflective TapeOverall Height Stands 72" TallMounting Hardware included:   1- Spring

If your boss cares he will buy some of these

Eliminate litter with an Outdoor Smoking Stand

and other asphalt concrete surfaces

1 in x 20 ft Guardian Hose Non-Heated for All Melter PTFE Core - Built in Swivels and Removable Cover Crack Wand Handle 5" square 7 Gauge StandardOur 1" x 20 ft Non Heated Hose is for all Crack Melters with PTFE Core. This is our premier Non Heated Hose for Crack Sealing. This Tar Hose operates at 400 degrees and as it is lighter by about 12 lbs then most others. The Guardian comes with a removable outer cover and the swivels are built into the hose. Non Heated Crack Sealing Hose for Hot Rubber application 1" x 20 Foot Hot Crack Seal Hose (non heated hose but for hot rubber use) Swivels built