Tork Craft | Annular Hole Cutter HSS 42 X 55mm Broach Slugger Bit Type_Shredders through without much effort

through without much effort

DF-250 or DE-250

Quick connect attach system

folding extension

Tork Craft | Annular Hole Cutter HSS 42 X 55mm Broach Slugger Bit Type_Shredders through without much effortAnnular Hole Cutter HSS 42 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these